Start with what you want to make and what you own. Then check artwork fit, supplier instructions and any purchases you still need.
See how a setup is checked
Cut-sheet square coaster
A 3-inch design on an assumed measured 3.5-inch panel, using a Maker 4 and EasyPress SE 12 × 10. This example assumes the listed equipment and supplies are already owned. Replace the measurements and ownership with your own.
The same flat press has no supported pairing with this Cricut ceramic mug. A small design and owned equipment cannot turn a missing press-to-blank relationship into an approved setup.
Follow the printed hardboard coaster example. This source-documented printer route uses conventional flat-press class instructions. Confirm your exact press; class guidance does not create an approved model pairing or a complete purchase total.
Fit checks your entered size. Instruction completeness checks the documented method. Purchase completeness checks what is owned, available and priced. A passed size check alone is not approval to press.
Your setup options
Choose your project and owned items, then continue to the size and fit checks.
Choose your exact blank and press context.
Enter the physical width and height of your artwork.
Add a budget, or leave it blank to see options without a budget limit.
Your results will show compatible candidates and the source checks or measurements that still need attention.