Sunrise sprig project artwork
Version 1.0 - October 3, 2026

Files
- sunrise-sprig-3in.svg: original art only, 3 x 3 inches, editable vectors, no text or fonts
- sunrise-sprig-letter-proof.svg / .pdf: Letter 8.5 x 11 inches, same art and a separate 1-inch square

Use
The files are unmirrored. For the documented Unisub #5677 hardboard project, mirror once in the Brother SP1 driver. Print the Letter sheet at actual size / 100%; disable fit-to-page. Measure the outside edges of the separate square: both must be 1 inch (25.4 mm). If either differs, fix scaling and print again before heating. Cut away the square and all labels. Trim between the outside crop marks to keep a 3.75-inch square of transfer paper centered around the 3-inch artwork. Remove every crop mark, label and the scale square, then align the paper square to the blank. The 3-inch canvas is an original design choice, not a supplier-certified printable boundary. Compare with the actual blank before heating.

Use terms
This original vector artwork and scale aid were created for Make Press Repeat. You may download, resize, print and cut these files for personal or commercial finished physical projects. No attribution is required. Do not redistribute or sell the standalone digital files or imply supplier endorsement. No supplier template, trademark, font or photograph is included.

Evidence
The art is a digital deliverable, not a photograph or evidence of a finished item. No physical transfer, color accuracy, durability or machine performance has been independently tested. The scale square checks output size, not color accuracy or temperature.

Project instructions
https://makepressrepeat.com/projects/printed-hardboard-coaster


Cut-sheet artwork additions - version 1.1
- sun-and-leaves-coaster-cut-3in.svg: 3 x 3-inch single-color starting design for the Cricut square coaster
- sun-and-leaves-mug-cut-2p5in.svg: 2.5 x 2.5-inch single-color starting design for the Cricut 12 oz mug
- sun-and-leaves-shirt-cut-6in.svg: 6 x 6-inch single-color starting design for the Cricut XL shirt
- cut-artwork-fit-proofs.pdf: three ordinary-paper sizing proofs in that order, with a separate one-inch check square on every page

These dimensions are editorial starting choices, not manufacturer-recommended sizes, measured imageable areas or tested fits. Measure the actual blank and check its source instructions before cutting. Resize with the aspect ratio locked if needed. Verify the artwork width and height after SVG import; some design software handles SVG dimensions differently.

Each cut SVG is unmirrored, contains one single-color compound path made from solid closed nonoverlapping shapes, and has no fonts, text, check square or print-image layers. Use it as cut artwork, not Print Then Cut. For the documented Cricut Infusible Ink workflow, mirror exactly once in Design Space at the cutting stage. Keep the transfer sheet liner-side down and follow the project’s canonical sequence. The paper-fit PDF is optional, printed on ordinary paper at actual size / 100%; it is never a sublimation transfer.

Coaster: 3 inches is below the blank’s 3.75-inch outside dimensions, but confirm the actual usable white face. Mug: 2.5 inches is below the 3.79-inch manufacturer maximum height; retain at least 0.5-inch handle clearance and check sheet/cutter limits. Shirt: 6 inches is below the documented sheet, cutter and press dimensions, but the actual flat placement must be measured. Its supplier peel-direction conflict remains unresolved: the downloadable art does not authorize cutting or heating past that project gate.

The same physical-project use terms above apply to these original cut files and paper proofs. No hands-on transfer, physical fit, machine cut, weedability or durability test is claimed.